Characteristics and application of transfer printi

2022-07-29
  • Detail

See the characteristics and application of transfer printing labels in a variety of ways

the commercialization of printing patterns is to print design patterns, photos, text information, etc. on the substrate, making it a completely independent product with increasing international influence in China's plastic machine industry, such as labels. There are many printing methods for labels. This article mainly introduces the transfer printing label, that is, the printing pattern and color are transferred to the substrate by means of physical and chemical methods. The application characteristics and use methods of this kind of printing technology brush, formerly known as Bayer materials technology brush, are different from the conventional printing brush

rubbing transfer label

1 Features and uses: it is suitable for hard and smooth materials such as paper, wood and plastic. It is used in art design, photo albums and toy stickers. Scratch, transfer paper, etc

2. Usage: uncover the release paper on the surface of the finished label, align the pattern with the position to be transferred, evenly wipe the back of the pressure sensitive film with fingernails or wood chips, and tear off the transparent film to complete the image and text transfer

reverse pressure sensitive transfer label

1 Features and uses: reverse pressure sensitive transfer labels are divided into solvent resistant, scratch resistant and baking resistant. Solvent resistant pressure sensitive transfer mark is solvent resistant after transfer; The scratch resistant pressure sensitive transfer mark can have good adhesion and scratch resistance without any treatment after transfer, but it should avoid scratching by hard objects; High temperature baking pressure sensitive transfer labels can be polished and baked after transfer, or directly baked without spraying varnish. Pressure sensitive transfer labels are suitable for the surface decoration of hard materials such as metal, plastic and synthetic materials, such as air conditioners, refrigerators, washing machines, water heaters, fishing rods, golf clubs, bicycles and other sports equipment

2. Usage: just tear off the protective film, stick it at the transferred position, evenly squeeze it and tear off the backing paper to complete the pattern transfer

reverse water transfer label (B, C transfer label)

1 Features and uses: the so-called B and C transfer marks, that is, the reverse transfer pattern needs to be transferred with the help of B and C transfer liquid, and can be applied to the smooth surfaces of bicycle frames, automobile shells, fishing rods, wood, metal, etc

2. Usage: soak the water transfer label paper in liquid B and C for about 6 seconds, take it out and stick it on the printed surface, scrape it evenly with a rubber strip on the back of the paper, scrape the middle water, and then wet it with water, you can tear off the bottom paper, and the pattern will be transferred to the substrate. Wipe off the water left by the pattern on the surface of the substrate with a clean wet cloth, and spray varnish and bake after fully drying. Because its surface has anti viscosity, it is generally applied to products with regular surface

soluble positive water transfer label

timely understand user needs 1 Features and uses: the so-called soluble positive water transfer label, that is, the water transfer paper that plays the role of film-forming and bridging, can be dissolved with transparent glazing oil in the post-treatment process, leaving no traces. It can be used on the surface of helmets, bicycles, cars, all kinds of rackets, clubs, toys, musical instruments, small furniture and other materials

2. Usage: cut off the label pattern, immerse it in warm water at 25-40 ℃ for 30-60 seconds, take out the transfer paper and stick it on the surface of the substrate. It is appropriate that the pattern can slide on the paper, indicating that the picture and text have been separated from the bottom paper. After cleaning the surface of the object to be pasted with water, wipe the moisture under the layer evenly with a rubber strip to make the pattern stick flat on the surface of the material. Finally, wipe the moisture with a clean cloth to complete the transfer of the pattern

due to the toughness of the image and text adhesive film, when scraping the moisture under the layer, it is necessary to make the pattern adhere to the irregular surface while scraping, which is also the greatest advantage of water transfer printing. After sufficient drying, transfer pictures and texts can be sprayed with varnish and baked. It must be fully dried, otherwise bubbles will appear after baking, resulting in waste bid. Water transfer labels are characterized by exquisite printing, bright colors, wide range of applicable materials, firm and beautiful labels, not easy to change color, especially for irregular surfaces

peelable film type forward water transfer label

1 Features and uses: the peelable film type forward water transfer label means that during the transfer process, the water transfer adhesive film that plays the role of film forming and bridging can be torn off, and the ink layer of the pattern is attached to the material after transfer, so as to achieve the effect that direct printing cannot be achieved. It is widely used for irregular surface decoration of ceramic and glass handicrafts, gifts, bicycle frames, motorcycle baffles, packaging containers, helmets, etc

2. Usage: cut the label and immerse it in warm water at ℃ for 30-60 seconds, take out the transfer paper and stick it on the surface of the substrate; After the pattern can slide on the paper, that is, it has been separated from the attached paper, clean the surface of the pasted object, press and hold the pattern to pull out the bottom paper, and adhere the pattern to the surface of the substrate; Wipe the moisture under the layer evenly with a rubber strip, so that the pattern can be pasted on the surface of the substrate, and then wipe the moisture with a clean cloth. The pattern transfer is completed. After the transfer, it should be dried for at least 1 hour. For plastic, wood and other products, it should be coated with varnish after stripping. Good results can be achieved only by baking at 800 ℃ for 10 minutes, or at ℃ for 10 minutes. This method is applicable to glass and ceramic products, also known as glass and ceramic low-temperature water transfer labels

Copyright © 2011 JIN SHI